How to configure ipushpull

To enable ipushpull on Symphony, your Solution Architect needs to first enable the app to appear in your Admin Portal.
 
Note: Contact the Symphony Support team if you do not know who your Solution Architect is
 
Once the application is present in your Admin Portal, enable ipushpull by following these steps:
 

1. In Symphony, click Settings in the upper right-hand corner, followed by General (Figure 1):

 

1.png

 Figure 1 Settings/General

 

2. Click Go to AC Portal at the bottom of the screen (Figure 2):

 

2.png

Figure 2 Go To AC Portal
 
Note: Alternatively, navigate to https://companyabc.symphony.com/?admin as an administrator (where companyabc is the name of your Pod)
 
3. In the left nav, click on App Settings (Figure 3):
 
3.png
 
Figure 3 App Settings
 
4. Search for ipushpull and select Enable in the Global Status column (Figure 4):
 
4.png
 
Figure 4 Enable Ipushpull
 
5. Click Save (Figure 5):
 
6.PNG
 
Figure 5 Save
 

6. Exit the Admin Portal and navigate to the Symphony Market from the main Symphony window (Figure 6):

 

7.png

Figure 6 Symphony Market

 

7. Search for ipushpull in the Search for Applications field (Figure 7):

 

8.png

Figure 7 Search For Applications

 

8. Choose ipushpull from the results and click add (Figure 8):

 

9.PNG

Figure 8 Ipushpull

 

9. Click Return to Symphony to return to the main Symphony window and in the left Nav, ipushpull will appear under Applications (Figure 9):

 

10.PNG

Figure 9 Ipushpull Listed In The left Nav